Hochiki YBO-BSB2(WHT)/RL/SIL - WHITE ADDR BASE SOUNDER BEACON

Single Loop Address - addressed via the TCH-B100 Hand Held Programmer Variable Sound Output 50 ~ 98 dB(A) (±2 dB(A)) output at 1 metre Sounder and Beacon can operate independently*1 0.5 or 1Hz flash frequency*1 Designed to fit to the Standard Base (YBN-R/3/SIL) or the Isolator Base (YBN-R/3-SCI-SIL) and can be fitted with any of the SIL2 approved Range of ESP Sensors, Beacons or Remote Indicators. 51 User-Selectable Tones (all tones EN54-3 compatible) Auto-Shutdown feature prevents noise-pollution*1 ‘O’ Rated Beacon to EN54-23 Available with Red or White LEDs SIL Level 2 approved

• Model YBO-BSB2(WHT)/RL-SIL is an O Rated EN54-23 compliant addressable loop powered Base Sounder with integral Beacon, innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dB(A) (±2 dB(A)) with low current consumption. The unit is designed to fit to the Standard Base (YBN-R/3-SIL) or the Isolator Base (YBN-R/SCI-SIL) and can be fitted with any of the SIL2 ESP Range of Sensors, Beacons or Remote Indicators. The unit can also be converted into a wall sounder beacon with the simple addition of a Cap (SI/CAP2(WHT)). The sounder is Ingress Protection rated to IP21 and for internal use only. An Auto-Shutdown feature allows the user to set a fixed time within which the sounder or beacon will operate, before automatically shutting down, cutting noise pollution in the case of the sounder element*. Sounder and Beacon elements can be operated independently from each other*. *Dependent on control panel compatibility.