Hochiki HCP-E(SCI)M MARINE CALL POINT C/W ISOLATOR (HCP-EM(SCI))

Fast response Bi-coloured status LED Non-frangible element fitted as standard (conforms to EN54) Addressed with TCH-B200 Hand Held Programmer & PL-3 lead Surface or flush mounting Approved to MED, DNV, IEC 60092-504 requirements DNV-GL Module B (Type Examination) DNV-GL Module E (Product Quality Assurance)Marine Approved

• Model HCP-EM(SCI) is a Manual Call Point with integral short-circuit isolator, which is fully compatible with Hochiki’s ESP analogue addressable protocol The unit incorporates a bi-coloured LED, which can be selected as pulsing/non-pulsing* for communications polling and is continuously lit when the unit is operated – in these two states the LED will show red. The LED will show amber when a short-circuit is present but will switch to red if the unit is activated. The unit operates by pressing the EN54 compliant non-frangible (plastic) element and produces a high level ESP interrupt. A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring The unit is addressed using the TCH-B200 Hand Held Programmer for quick and reliable addressing. The unit can be flush mounted as supplied. For surface fixing a suitable back box such as the SR MOUNTING BOX is required (sold separately). An optional glass element is also available *Control panel compatibility required