SMARTLOCK — Sistemas de Segurança0
LojaSMARTLOCK
Todas as categorias
Controlo de acessos
Altronix Controlador de energia para controlo de acessos (Maximal7DV)

Altronix

Altronix Controlador de energia para controlo de acessos (Maximal7DV)

Por encomenda

  • EstadoNovo
  • Garantia1 ano
  • MarcaAltronix
  • ReferênciaMaximal7DV
  • CódigoSL-05582
  • EntregaLuanda, combinada no pedido

Produtos relacionados

Descrição

Access Power Controller w/ Power Supply/Charger, 16 PTC Class 2 Relay Outputs, 24VDC @ 9A, 220VAC, BC800 Enclosure

Maximal7DV distributes and switches power to access control systems and accessories. Unit converts a 220VAC (working range 198VAC - 256VAC), 50/60Hz input into sixteen (16) independently controlled 24VDC PTC protected outputs. The outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Keypad, Push Button, REX PIR, etc. Units will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs.

Ver mais informaçõesVer menos

Ficha técnica

  • Modelo: Maximal7DV
  • Entrada: 220VAC (working range 198VAC - 256VAC), 50/60Hz, 2.4A input.
  • Opções de entrada da fonte de alimentação: a) Two (2) common power input for either ACM8CB and lock power (factory installed).; b) Two (2) isolated power inputs (external power supply is required), (curr
  • Opções de entrada: a) Sixteen (16) normally open (NO) inputs.; b) Sixteen (16) open collector inputs.; c) Any combination of the above.
  • Saída: 24VDC outputs.
  • Corrente de saída máxima: 24VDC @ 9.4A.; Sixteen (16) independently controlled outputs can be Fail-Safe and/or Fail-Secure power outputs (auto-resettable).; Sixteen (16) auxiliary power
  • Fuse Ratings: Power Supply input fuse rated @ 10A/250V.; ACM8CB boards main fuse is rated at 10A. Output PTCs are rated @ 2.5A.
  • Características: Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the sixteen (16) outputs.
  • Opções de entrada de corte do alarme de incêndio: a) Normally open (NO) or normally closed (NC) dry contact input.; b) Polarity reversal input from FACP signaling circuit.; Alarm output relay indicates that FAC
  • Supervision: AC fail supervision (form "C" contacts).; Notification trigger is selectable for 30 seconds (factory set) or 6 hours.; Low battery and battery presence supervis
  • Carregamento de bateria: Capacity: 12AH/12VDC (4 within enclosure); 40AH/65AH (requires separate enclosure).; Type: Sealed lead acid or gel type.; Failover: Upon AC loss, instantaneous.
  • Indicadores visuais: Red LEDs indicate outputs are triggered (relays energized).; Green LED indicates FACP disconnect is triggered.; AC input and DC output LED indicators.
  • Temperatura: Operating: 0° C a 49° C (32° F a 120° F).; Storage: - 20° C a 70° C ( - 4° F a 158° F).; Relative Humidity: 85% +/- 5%.; BTU/Hr. (approx.): 115 BTU/Hr.; Sys
  • Dimensões: 483 mm W x 660.4 mm H x 159 mm D

Mais na mesma categoria

Fale connosco