SMARTLOCK — Sistemas de Segurança0
LojaSMARTLOCK
Todas as categorias
Controlo de acessos
Altronix Controlador de energia para controlo de acessos (Maximal11FV)

Altronix

Altronix Controlador de energia para controlo de acessos (Maximal11FV)

Por encomenda

  • EstadoNovo
  • Garantia1 ano
  • MarcaAltronix
  • ReferênciaMaximal11FV
  • CódigoSL-05595
  • EntregaLuanda, combinada no pedido

Produtos relacionados

Descrição

Access Power Controller w/ Power Supply/Chargers, 16 Fused Relay Outputs, Dual 12/24VDC P/S @ 3.5A each, FAI, LinQ2 Ready, 220VAC, BC800 Enclosure

Maximal11FV Access Power Controller distributes and switches power to access control systems and accessories. It converts a 220VAC (working range 198VAC - 256VAC), 50/60Hz input into sixteen (16) independently controlled 12VDC or 24VDC fuse protected outputs. These Fail-Safe/Fail-Secure power outputs may be converted to dry form "C" contacts. The outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Keypad, Push Button, REX PIR, etc. Units will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs. All interconnecting equipment must be UL Listed.

Ver mais informaçõesVer menos

Ficha técnica

  • Modelo: Maximal11FV
  • Entrada: 220VAC (working range 198VAC - 256VAC), 50/60Hz, 4.2A input.
  • Opções de entrada da fonte de alimentação: a) Two (2) common power input for either ACM8 and lock power (factory installed).; b) Two (2) isolated power inputs (external power supply is required). Current
  • Opções de entrada: a) Sixteen (16) normally open (NO) inputs.; b) Sixteen (16) open collector inputs.; c) Any combination of the above.
  • Saída: 12VDC and/or 24VDC outputs.
  • Opções de corrente de saída máxima: A) 12VDC @ 3.3A plus 12VDC @ 3.3A.; B) 12VDC @ 3.3A plus 24VDC @ 3.6A.; C) 24VDC @ 3.6A plus 24VDC @ 3.6A.; Power-limited outputs.; Sixteen (16) independently c
  • Opções de saída: a) Sixteen (16) Fail-Safe and/or Fail-Secure power outputs.; b) Sixteen (16) form "C" 5A rated relay outputs.; c) Any combination of the above.; Sixteen (16) au
  • Fuse Ratings: Power Supply input fuse rated @ 5A/250V.; ACM8 boards main fuse is rated at 10A. Fused outputs are rated @ 2.5A each.
  • Características: Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the sixteen (16) outputs.
  • Opções de entrada de corte do alarme de incêndio: a) Normally open (NO) or normally closed (NC) dry contact input.; b) Polarity reversal input from FACP signaling circuit.; Alarm output relay indicates that FAC
  • Supervision: AC fail supervision (form "C" contacts).; Notification trigger is selectable for 30 seconds (factory set) or 2 hours.; Low battery and battery presence supervis
  • Carregamento de bateria: Capacity: 12AH/12VDC (4 within enclosure); 40AH/65AH (requires separate enclosure).; Type: Sealed lead acid or gel type.; Failover: Upon AC loss, instantaneous.
  • Indicadores visuais: Red LEDs indicate outputs are triggered (relays energized).; Green LED indicates FACP disconnect is triggered.; AC input and DC output LED indicators.
  • Temperatura: Operating: 0° C a 49° C (32° F a 120° F).; Storage: - 20° C a 70° C ( - 4° F a 158° F).; Relative Humidity: 85% +/- 5%.
  • BTU/Hr. (approx.): 12VDC: 41 BTU/Hr.; 24VDC: 88 BTU/Hr.; 12VDC and 24VDC: 64 BTU/Hr.; System AC input VA requirement: 924VA.
  • Dimensões: 483 mm W x 660.4 mm H x 159 mm D

Mais na mesma categoria

Fale connosco