SMARTLOCK — Sistemas de Segurança0
LojaSMARTLOCK
Todas as categorias
Controlo de acessos
Altronix Módulo de distribuição de energia para controlo (AL300M220)

Altronix

Altronix Módulo de distribuição de energia para controlo (AL300M220)

Por encomenda

  • EstadoNovo
  • Garantia1 ano
  • MarcaAltronix
  • ReferênciaAL300M220
  • CódigoSL-04429
  • EntregaLuanda, combinada no pedido

Produtos relacionados

Descrição

Access Power Distribution Module w/ Power Supply/Charger, 5 PTC Class 2 Outputs, 12/24VDC @ 2.5A, FAI, 220VAC, BC300 Enclosure

AL300M220 is specifically designed for use with access control systems and accessories. This units converts a 220VAC, 60Hz input into five (5) individually PTC protected 12VDC or 24VDC outputs. Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-Safe and Fail-Secure modes. Controlled trigger input is achieved through normally open (N.O.) or normally closed (N.C.) supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form "C" dry output relay enables HVAC Shutdown, Elevator Recall or may be used to trigger auxiliary devices.

Ver mais informaçõesVer menos

Ficha técnica

  • Modelo: AL300M220
  • Entrada: Input 220VAC, 60Hz, 1A.; Input fuse rated @ 3.5A/250V.; Fire Alarm Panel or Access Control System trigger inputs. N.O. or N.C. supervised trigger input and pola
  • Saída: 12VDC or 24VDC selectable outputs.; 2.5A supply current.; Five (5) (auto-resettable) PTC protected outputs, rated @ 2A.; Output relay energizes when unit is tri
  • Carregamento de bateria: Built-in charger for sealed lead acid or gel type batteries.; Automatic switch over to stand-by battery when AC fails.; (Batteries are sold separately).
  • Supervision: AC fail supervision (form "C" contacts).; Low battery supervision (form "C" contacts).; Battery presence supervision (form "C" contacts).; Power fail supervisio
  • Indicadores visuais: AC input and DC output LED indicators (power supply board).; Red LEDs indicate condition of power outputs (multi-output board).; Power & input trigger LEDs (mul
  • Temperatura: Operating: 0° C a 49° C (32° F a 120° F).; Storage: - 20° C a 70° C ( - 4° F a 158° F).; Relative Humidity: 85% +/- 5%.
  • BTU/Hr.: 12VDC: 12 BTU/Hr.; 24VDC: 31 BTU/Hr.; System AC input VA requirement: 176VA
  • Dimensões: 317.5 mm W x 330.2 mm H x 82.6 mm D

Mais na mesma categoria

Fale connosco