SMARTLOCK — Sistemas de Segurança0
LojaSMARTLOCK
Todas as categorias
Controlo de acessos
Altronix Controlador de alimentação para controlo (AL1024ACMCBJ220)

Altronix

Altronix Controlador de alimentação para controlo (AL1024ACMCBJ220)

Por encomenda

  • EstadoNovo
  • Garantia1 ano
  • MarcaAltronix
  • ReferênciaAL1024ACMCBJ220
  • CódigoSL-04490
  • EntregaLuanda, combinada no pedido

Produtos relacionados

Descrição

Access Power Controller w/ Power Supply/Charger, 8 PTC Outputs, 24VDC @ 10A, 220VAC, BC600 Enclosure

Altronix AL1024ACMCBJ220 distribute and switch power to access control systems and accessories. It converts a 220VAC 50/60Hz input into eight (8) independently controlled 24VDC PTC protected outputs. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. Units will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

Ver mais informaçõesVer menos

Ficha técnica

  • Modelo: AL1024ACMCBJ220
  • Entrada: Voltage: 220VAC (range 198VAC - 256VAC) 50/60Hz rated @ 10A; Fuse Rating: 6.3A/250V
  • Opções de entrada da fonte de alimentação: a) One (1) common power input for ACM8CB and lock power (factory installed).; b) Two (2) isolated power inputs - One (1) to power the ACM8CB and one (1) for loc
  • Opções de entrada: a) Eight (8) normally open (NO) inputs.; b) Eight (8) open collector inputs.; c) Any combination of the above.
  • Saída: 12VDC or 24VDC outputs.; Power-limited outputs.; Eight (8) independently controlled Fail-Safe and/or Fail-Secure power outputs.; Eight (8) auxiliary power outpu
  • Características: Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs.
  • Opções de entrada de corte do alarme de incêndio: a) Normally open (NO) or normally closed (NC) dry contact input.; b) Polarity reversal input from FACP signaling circuit.; Alarm output relay indicates that FAC
  • Indicadores visuais: Red LEDs indicate outputs are triggered (relays energized).; Green LED indicates FACP disconnect is triggered.; AC input and DC output LED indicators.
  • Carregamento de bateria: Built-in charger for sealed lead acid or gel type batteries.; Automatic switch over to stand-by battery when AC fails.; AC input and DC output LED indicators.;
  • Temperatura: Operating: 0ºC to 49ºC (32ºF to 120ºF).; Storage: - 20ºC to 70ºC ( - 4ºF to 158ºF).; Relative Humidity: 85% +/- 5%.
  • BTU/Hr. (approx.): 24VDC: 123 BTU/Hr.
  • Dimensões: 368.3 mm W x 457.2 mm H x 114.3 mm D

Mais na mesma categoria

Fale connosco