Yale Salva-V Series Double Point Panic Exit Device (37-8002-3000-00-30-11)

Descrição

Material: Push bar –Steel/Stainless steel pressed Head Cover – Steel/Stainless steel pressed Spring – Stainless steel Latchbolt: 3/4” throw, stainless steel Dead Latch Bolt: 5/8”, steel Strike: For 5/8” stop. Plus shim for 1/2” stop Projection: 2-1/2” maximum, 1-7/8” pressed Reversible: Non-handed,

Material: Push bar –Steel/Stainless steel pressed Head Cover – Steel/Stainless steel pressed Spring – Stainless steel Latchbolt: 3/4” throw, stainless steel Dead Latch Bolt: 5/8”, steel Strike: For 5/8” stop. Plus shim for 1/2” stop Projection: 2-1/2” maximum, 1-7/8” pressed Reversible: Non-handed, reversible for all functions and trims For Door: 1-3/4” thick of wood or metal door. Specify thickness if other than 1-3/4” Backset: 2-3/4” standard Door Width: 3” standard for door width of 2”-6” to 3”-0” 4” standard for door width of 3”-0” to 4”-0” Stile: 4-1/4” minimum Top & Bottom Rod Length for 7" door: Top rod 45-1/4”, bottom rod 34” Mounting height: 40-5/16” from CL to finished floor recommended Mounting: Furnished standard with sheet metal & machine screws or SNB as option Cylinder: For trim, knob, lever & thumb-piece type “Schlage C” key way Dogging: 1/4 turn, hex key dogging on non-fire labeled device UL Listed: For “Panic Hardware” and “UL”. Labeled (1.5 hours) fire exit hardware Operation: Inside by slight pressure on any point of the push bar all time