SMARTLOCK — Sistemas de Segurança0
LojaSMARTLOCK
Todas as categorias
Controlo de acessos
Paxton Paxton10 – conector de saída (010-432)

Paxton

Paxton Paxton10 – conector de saída (010-432)

Por encomenda

  • EstadoNovo
  • Garantia1 ano
  • MarcaPaxton
  • Referência010-432
  • CódigoSL-04416
  • EntregaLuanda, combinada no pedido

Produtos relacionados

Descrição

The Paxton10 Output Connector is a compact expansion module designed to control external equipment and building systems within the Paxton10 system. This module features 8 relay outputs , allowing you to easily switch devices or systems. The I/O connector is available in three versions: as an I/O con

The Paxton10 Output Connector is a compact expansion module designed to control external equipment and building systems within the Paxton10 system. This module features 8 relay outputs , allowing you to easily switch devices or systems. The I/O connector is available in three versions: as an I/O connector, an Input connector (with 16 inputs) and an Output connector (with 8 relay outputs). These are always supplied as separate PCBs.

Ver mais informaçõesVer menos

Installation – The Output Connector is supplied as a separate PCB. Place the Output connector in a suitable housing unit. The Output connectors are stackable, allowing you to install two Output connectors in a single housing unit.

Connect directly to the connector port of a Paxton10 door controller. Communication between the controller and the connector takes place via RS485 with encryption. Connectors are powered by, and communicate directly with a Paxton10 door controller, so no external power supply is required. If the Paxton10 Door Controller uses a 12V power supply, it is possible to connect two Output connectors in series to a single door controller.

Please note: When the Paxton10 door controller is used with a PoE+ splitter, it is only possible to connect one Output connector .

Cabling – The maximum cable distance between the controller and the Output connector is 100 metres. A Cat5 cable fitted with an RJ45 connector must be used to connect the Output connector.

Operation – Outputs are configured using the triggers and actions feature within the Paxton10 software.

  • Available in 3 variants
  • 8 relay outputs per connector
  • Can be used to control lifts, heating, lighting, etc.
  • Managed via Paxton10 Triggers & Actions
  • Support for 2 input connectors when using a 12V power supply
  • Connectors are powered by and communicate via a Paxton10 controller

Ficha técnica

  • Sales code: 010-432
  • Sistema: Paxton10
  • Característica: Available in 3 variants
  • Característica: 8 relay outputs per connector
  • Característica: Can be used to control lifts, heating, lighting, etc.
  • Característica: Managed via Paxton10 Triggers & Actions
  • Característica: Support for 2 input connectors when using a 12V power supply
  • Característica: Connectors are powered by and communicate via a Paxton10 controller

Mais na mesma categoria

Fale connosco