Paradox M Expansor de entradas/saídas duplo, sem fios ou bus (ZP2M)

Ficha técnica

• Entrada de alimentação: 12 VDC / 500 mA Min. (Power Pack or M console aux)
• Device Input Current: 200 mA Max
• Consumo de energia: 2.4 W Max
• Bus Connection: M-Bus encrypted RS-485, up to 1,000 ft
• Bateria: 1 x 3.7V Li-ion rechargeable battery, 1000 mAh, 2 hours backup @100 mA aux. (min. 15 mA load required to power Aux)
• Aux Output Supply: 11V to 13.8V DC, 100 mA
• Tipo de ligação sem fios: GFSK two-way with frequency and encryption hopping
• Frequência RF: 868 (865.05–867.95) MHz or 914 (902.25–927.55) MHz; may vary by region
• Potência RF: 868 MHz: +14 dBm radiated; 914 MHz: +22 dBm (permitted countries)
• Número de entradas: Two fully programmable zones or signaling inputs
• Input Connection Type: No EOL, 1EOL or Two EOL (1K ohm)
• Número de saídas: Two relay outputs 30V / 2A, normally open or close, configurable
• In Application Status Indication: Zone open/close, Output open/close, tamper status, power available, battery level, temperature, TX/RX values, wireless or Bus connection
• Status Indication: Logo: Bus or wireless, online, offline, battery or power operation, upgrade in process, tamper, zone LEDs – open/close, Output Active or not
• Tempo de transmissão: Less than 20 ms
• Supervision Time: 20 minutes, 10 minutes (Default), and 3 minutes
• Ambiente de instalação: Interior
• Firmware Upgrade: Remotely via Bus or over-the-air M wireless
• Temperatura de funcionamento: -20°C a 50°C (-4°F a 122°F)
• Battery Charging Temperature: 0°C a 40°C (32°F a 104°F)
• Humidade: 93% maximum (ULC)
• Auto Learn: Sim
• Colors: Branco
• Dimensões: 8.7W x 6.9H x 3D cm (3.4″W x 2.7″H x 1.2″D)
• Peso: 0.109 kg