Hochiki

Hochiki CHQ-DZM/DIN(SCI)-IS/ SIL DUAL ZONE MONITOR

Por encomenda

• EstadoNovo
• Garantia2 anos (fabricante)
• MarcaHochiki
• CódigoSL-07815
• EntregaLuanda, combinada no pedido

Single loop address Requires an auxiliary 24 V dc supply Supports two independent zones of Hochiki I.S. Conventional Detectors Both zones fully monitored for short/open-circuit Boxed module version also available Both models feature an integral short-circuit isolator

Single loop address Requires an auxiliary 24 V dc supply Supports two independent zones of Hochiki I.S. Conventional Detectors Both zones fully monitored for short/open-circuit Boxed module version also available Both models feature an integral short-circuit isolator

• Model CHQ-DZM/DIN(SCI)-IS/SIL is Dual Zone Module which is fully compatible with Hochiki's ESP analogue addressable protocol and I.S. equipment. It is supplied as a DIN Rail mountable module, a boxed version is also available. Addressing is achieved via simple DIL switches The device is designed to allow up to 40 (20 per zone) Conventional I.S. CDX Range detectors (SLR-E-IS-SIL or DCD-1E-IS-SIL) in the hazardous area to be interfaced to Hochiki's ESP analogue addressable system within the safe area*. (Please note that this module should only be installed in the safe area) The conventional zones on the CHQ-DZM/DIN(SCI)-IS/SIL do not support any line continuity options; therefore if Call Points are being interfaced they should be wired at the beginning of the zone * An appropriate barrier must be used