Fechaduras mecânicas
Fechaduras mecânicas
dormakaba Defender 520 S
Por encomenda
- EstadoNovo
- Garantia2 anos (fabricante)
- Marcadormakaba
- CódigoSL-06506
- EntregaLuanda, combinada no pedido
The 4-sided bolt work is characterised by its smooth running gear wheel and its solid construction. No defined locking order in case of 2-lock operation.
The 4-sided bolt work is characterised by its smooth running gear wheel and its solid construction. No defined locking order in case of 2-lock operation.
• Dimensions base plate 300 x 102 mm • Installation applications 2-lock operation • 4-sided, shafts 72 mm wide, 2.5 mm thick • Shaft throw 30 mm, opening angle of handle 90° • Shaft connections: elongated hole 6.4 x 13.6 mm, Ø 6.4 mm • Lock mounting: 4 x ¼" BSW threaded bushes • Mounting position of locks: vertical, bolt down, bolt throw 8.7-12 mm, blocking of horizontal shafts • For right hand doors, opening counter-clockwise • Material/surface Base plate and cover plate steel lacquered • Shafts steel blank
Ficha técnica
- Technical Details: Defender 520S - standard - Order number: 84013
- Technical Details: Installation applications 2-sided (front shaft I, hinge side shaft IV)
- Technical Details: 2-sided (upper shaft II, lower shaft III)
- Technical Details: Shaft throw 20 mm, opening angle of handle 60°
- Technical Details: Shaft throw 25 mm, opening angle of handle 75°
- Technical Details: Gear drive with follower 11 mm
- Technical Details: For right hand doors, opening clockwise
- Technical Details: For left hand doors, opening counter-clockwise
- Technical Details: For left hand doors, opening clockwise
- Technical Details: Manipulation protection Prepared for lock cover (fixing pins for glass or stainless steel plate)
- Technical Details: Manganese steel plate as drilling protection, 1.5 mm thick
- Technical Details: Manganese steel plate as drilling protection, 3 mm thick (2 x 1.5 mm)
- Technical Details: Surface Shafts galvanised blue
- Product details: Dimensions base plate 300 x 102 mm
- Product details: 4-sided, shafts 72 mm wide, 2.5 mm thick
- Product details: Shaft throw 30 mm, opening angle of handle 90°
- Product details: Shaft connections: elongated hole 6.4 x 13.6 mm, Ø 6.4 mm
- Product details: Mounting position of locks: vertical, bolt down, bolt throw 8.7-12 mm, blocking of horizontal shafts
- Product details: Gear drive with follower 8 mm
