Altronix
Câmaras e videovigilância

Altronix Fonte de alimentação/carregador multi-saída (Tango8AP)
Por encomenda
- EstadoNovo
- Garantia1 ano
- MarcaAltronix
- ReferênciaTango8AP
- CódigoSL-05768
- EntregaLuanda, combinada no pedido
Produtos relacionados
Altronix Fonte de alimentação/carregador multi-saída (Tango8APCB)Preço sob consulta
Altronix Fonte de alimentação/carregador multi-saída (Tango8P)Preço sob consulta
Altronix Fonte de alimentação/carregador multi-saída (Tango8PCB)Preço sob consulta
Altronix Fonte de alimentação alimentada por PoE (Tango1B)Preço sob consulta
Descrição
PoE Driven Multi-Output Power Supply/Charger With Access Power Controller, BC400 Enclosure
Altronix Tango8AP PoE Driven Multi-Output Power Supply/Charger With Access Power Controller converts an IEEE802.3bt PoE input into eight (8) regulated 24VDC and/or 12VDC outputs and eight (8) protected 24VDC and/or 12VDC outputs up to 65W. It eliminates the need for a high voltage inside of an enclosure. Tango8AP is designed to support a single 12VDC LiFePO 4 (Lithium Iron Phosphate) battery for 12VDC and 24VDC backup.
Ver mais informaçõesVer menos
Ficha técnica
- Modelo: Tango8AP
- Entrada Ethernet: 802.3bt PoE up to 90W or 802.3at up to 30W or 802.3af up to 15W
- Potência de saída (com 802.3bt 90W): 12VDC up to 5.4A (65W) and/or 24VDC up to 2.7A (65W).; Combined output not to exceed 65W.
- Ao carregar baterias: 12VDC up to 4.6A (55W) and/or 24VDC up to 2.3A (55W).; Combined output not to exceed 55W.
- Saída Ethernet: Pass-through Ethernet Port (data only).
- Carregamento de bateria: 12VDC battery charger for Lithium Iron Phosphate Battery (LiFePO 4 only).; Unique technology allows for single battery to backup 12VDC and/or 24VDC systems.; (B
- Supervision: Loss of PoE Input.; Battery Supervision.
- Indicadores (LED): Input: Indicates input voltage is present.; Output: Indicates normal operating condition.; PoE Type: PoE Class Indicator; Supervision: PoE Fail or BAT Fail.
- Entradas: 12VDC and 24VDC from Tango1B, factory wired.; Main Fuse Rating 10A/32V.
- Saídas: Fuse protected outputs rated @ 3A per output, non power-limited. Total output 20A max.
- Indicadores (LED): DC Output: Individual voltage LEDs indicate 12VDC (Green) or 24VDC (Green and Red).
- Entradas: 12VDC and 24VDC from Tango1B, factory wired.; Current Consumption: 0.6A @ 12V, 0.3A @ 24V with all relays energized; Main Fuse Rating 15/32A.
- Trigger Inputs: Eight (8) individually controlled trigger inputs:; a) Normally open (NO) inputs.; b) Normally closed (NC) inputs.; c) Open collector sink inputs.; d) Wet Input
- Saídas: Eight (8) Fuse protected outputs rated @ 2.5A per output, non power-limited. Total output 20A max.
- Output Ratings: Fuses are rated 2.5A each, PTCs are rated at 2A.
- Corte do alarme de incêndio: Supervised: Latching or non-latching, individually selectable for any or all of the eight (8) outputs.; EOL: 10K Resistor.
- Indicadores (LED): Red LEDs: Outputs are triggered (relays energized).; Blue LED: FACP disconnect is triggered.
- LED de tensão individuais: Green: 12VDC; Red: 24VDC.
- Temperatura: Operating: 0° C a 49° C (32° F a 120° F).; Storage: - 20° C a 70° C ( - 4° F a 158° F).
- Humidade relativa: 85% +/- 5%.
- BTU/Hr. (approx.): 54 BTU/Hr.
- Dimensões: 310.6 mm W x 393.7 mm H x 114.3 mm D
Mais na mesma categoria
Altronix
Altronix
Altronix Fonte de alimentação para CCTV (ALTV1224C220)
Preço sob consulta Por encomenda
Altronix
Altronix Fonte de alimentação para CCTV (ALTV1224DC1220)
Preço sob consulta Por encomenda
Altronix
