SMARTLOCK — Sistemas de Segurança0
LojaSMARTLOCK
Todas as categorias
Câmaras e videovigilância
Altronix PoE Driven Multi-Output Power Supply/Charger With Access Power Controller, BC400 Enclosure (Tango8AP)

Altronix

Altronix PoE Driven Multi-Output Power Supply/Charger With Access Power Controller, BC400 Enclosure (Tango8AP)

Por encomenda

  • EstadoNovo
  • Garantia2 anos (fabricante)
  • MarcaAltronix
  • ReferênciaTango8AP
  • CódigoSL-05768
  • EntregaLuanda, combinada no pedido

PoE Driven Multi-Output Power Supply/Charger With Access Power Controller, BC400 Enclosure

PoE Driven Multi-Output Power Supply/Charger With Access Power Controller, BC400 Enclosure

Altronix Tango8AP PoE Driven Multi-Output Power Supply/Charger With Access Power Controller converts an IEEE802.3bt PoE input into eight (8) regulated 24VDC and/or 12VDC outputs and eight (8) protected 24VDC and/or 12VDC outputs up to 65W. It eliminates the need for a high voltage inside of an enclosure. Tango8AP is designed to support a single 12VDC LiFePO 4 (Lithium Iron Phosphate) battery for 12VDC and 24VDC backup.

Ficha técnica

  • Modelo: Tango8AP
  • Ethernet Input: 802.3bt PoE up to 90W or 802.3at up to 30W or 802.3af up to 15W
  • Power Output (when using 802.3bt 90W): 12VDC up to 5.4A (65W) and/or 24VDC up to 2.7A (65W).; Combined output not to exceed 65W.
  • When charging batteries: 12VDC up to 4.6A (55W) and/or 24VDC up to 2.3A (55W).; Combined output not to exceed 55W.
  • Ethernet Output: Pass-through Ethernet Port (data only).
  • Battery Charging: 12VDC battery charger for Lithium Iron Phosphate Battery (LiFePO 4 only).; Unique technology allows for single battery to backup 12VDC and/or 24VDC systems.; (B
  • Supervision: Loss of PoE Input.; Battery Supervision.
  • Indicators (LED): Input: Indicates input voltage is present.; Output: Indicates normal operating condition.; PoE Type: PoE Class Indicator; Supervision: PoE Fail or BAT Fail.
  • Inputs: 12VDC and 24VDC from Tango1B, factory wired.; Main Fuse Rating 10A/32V.
  • Outputs: Fuse protected outputs rated @ 3A per output, non power-limited. Total output 20A max.
  • Indicators (LED): DC Output: Individual voltage LEDs indicate 12VDC (Green) or 24VDC (Green and Red).
  • Inputs: 12VDC and 24VDC from Tango1B, factory wired.; Current Consumption: 0.6A @ 12V, 0.3A @ 24V with all relays energized; Main Fuse Rating 15/32A.
  • Trigger Inputs: Eight (8) individually controlled trigger inputs:; a) Normally open (NO) inputs.; b) Normally closed (NC) inputs.; c) Open collector sink inputs.; d) Wet Input
  • Outputs: Eight (8) Fuse protected outputs rated @ 2.5A per output, non power-limited. Total output 20A max.
  • Output Ratings: Fuses are rated 2.5A each, PTCs are rated at 2A.
  • Fire Alarm Disconnect: Supervised: Latching or non-latching, individually selectable for any or all of the eight (8) outputs.; EOL: 10K Resistor.
  • Indicators (LED): Red LEDs: Outputs are triggered (relays energized).; Blue LED: FACP disconnect is triggered.
  • Individual voltage LEDs: Green: 12VDC; Red: 24VDC.
  • Temperature: Operating: 0° C to 49° C (32° F to 120° F).; Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity: 85% +/- 5%.
  • BTU/Hr. (approx.): 54 BTU/Hr.
  • Dimensões: 310.6 mm W x 393.7 mm H x 114.3 mm D

Na mesma categoria

Fale connosco