SMARTLOCK — Sistemas de Segurança0
LojaSMARTLOCK
Todas as categorias
Controlo de acessos
Altronix Access Power Controller w/ Power Supply/Charger, 16 PTC Class 2 Relay Outputs, 12VDC @ 9A, (Maximal5FDV)

Altronix

Altronix Access Power Controller w/ Power Supply/Charger, 16 PTC Class 2 Relay Outputs, 12VDC @ 9A, (Maximal5FDV)

Por encomenda

  • EstadoNovo
  • Garantia2 anos (fabricante)
  • MarcaAltronix
  • ReferênciaMaximal5FDV
  • CódigoSL-05578
  • EntregaLuanda, combinada no pedido

Access Power Controller w/ Power Supply/Charger, 16 PTC Class 2 Relay Outputs, 12VDC @ 9A, FAI, LinQ2 Ready, 220VAC, BC800 Enclosure

Access Power Controller w/ Power Supply/Charger, 16 PTC Class 2 Relay Outputs, 12VDC @ 9A, FAI, LinQ2 Ready, 220VAC, BC800 Enclosure

Maximal5FDV Access Power Controller distributes and switches power to access control systems and accessories. It converts a 220VAC (working range 198VAC - 256VAC), 50/60Hz input into sixteen (16) independently controlled 12VDC PTC protected outputs. The outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Keypad, Push Button, REX PIR, etc. Unit will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs. All interconnecting equipment must be UL Listed.

Ficha técnica

  • Modelo: Maximal5FDV
  • Input: 220VAC (working range 198VAC - 256VAC), 50/60Hz, 2.1A input.
  • Power supply input options: a) Two (2) common power input for either ACM8CB and lock power (factory installed).; b) Two (2) isolated power inputs (external power supply is required). Curre
  • Input options: a) Sixteen (16) normally open (NO) dry trigger inputs.; b) Sixteen (16) open collector inputs.; c) Any combination of the above.
  • Output: 12VDC outputs.
  • Maximum output current: 12VDC @ 8.6A.; Sixteen (16) independently controlled outputs.
  • Output options: a) Sixteen (16) Fail-Safe filtered power outputs.; b) Sixteen (16) Fail-Secure filtered power outputs.; c) Any combination of the above.; Sixteen (16) auxiliary
  • Fuse Ratings: Power Supply input fuse rated @ 5A/250V.; ACM8CB boards main fuse is rated at 10A. PTC protected outputs are rated @ 2.5A each.
  • Features: Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the sixteen (16) outputs.
  • Fire Alarm disconnect input options: a) Normally open (NO) or normally closed (NC) dry contact input.; b) Polarity reversal input from FACP signaling circuit.; Alarm output relay indicates that FAC
  • Supervision: AC fail supervision (form "C" contacts).; Notification trigger is selectable for 30 seconds (factory set) or 2 hours.; Low battery and battery presence supervis
  • Battery Charging: Capacity: 12AH/12VDC (4 within enclosure); 40AH/65AH (requires separate enclosure).; Type: Sealed lead acid or gel type.; Failover: Upon AC loss, instantaneous.
  • Visual Indicators: Red LEDs indicate outputs are triggered (relays energized).; Green LED indicates FACP disconnect is triggered.; AC input and DC output LED indicators.
  • Temperature: Operating: 0° C to 49° C (32° F to 120° F).; Storage: - 20° C to 70° C ( - 4° F to 158° F).; Relative Humidity: 85% +/- 5%.; BTU/Hr. (approx.): 53 BTU/Hr.; Syst
  • Dimensões: 483 mm W x 660.4 mm H x 159 mm D

Na mesma categoria

Fale connosco